How do I sync my Plantronics co54?
Press and hold the pairing button for 5-8 seconds on the back of your C054 charging base, then release your finger. You’ll see the white LED light start flashing on the front of the charging base.
How do I put my Plantronics headset in pairing mode?
Turn the headset on. Press and hold the call control button for about 5-6 seconds until the light on the headset starts flashing an alternating red-blue. Release the button and set the headset aside. On your cell phone, go to the Bluetooth menu and search for (or add) a device.
Why is my Plantronics headset not pairing?
If possible, remove the battery from the phone. Power the cell phone on again. Pair the headset with your phone again. If the issue persists, try Pairing the headset to a different cell phone.
How do I pair my Plantronics headset to my phone?
While the Voyager 5200s LEDs are flashing red/blue, activate Bluetooth on your phone and set it to search for new devices.
- iPhone Settings > General > Bluetooth > On.
- Androidâ„¢ Smartphones Settings > Wireless & Networks > Bluetooth: On > Scan for devices.
How do I connect my Plantronics headset to my laptop?
Power the headset on and when the indicator light flashes red and blue, release the call control button. Turn the Universal Adapter on. Press and hold the adapter pairing/connect button for 7-10 seconds. When adapter starts flashing red and blue release the buttons.
How do I reset my Plantronics C054 headset?
Plantronics CS540 (C054) and CS500 Series Full Reset – YouTube
How do I connect my Plantronics Bluetooth headset to my computer?
How to connect Plantronics Voyager Headset to Windows 10 Computer
How do I reset my Plantronics wireless headset?
How to Reset a Plantronics Bluetooth
- Turn on the headset by pressing the “Power/Answer” call button.
- Hold down the “Power” button and the “Lower Volume” button (minus button) together until the light goes out.
- Wait for one minute for the reset to be complete.
- Turn on the headset again by pressing the “Power” button.
How do I reset my Plantronics Bluetooth headset?
Reset Plantronics Bluetooth Headset
- Remove the Plantronics headset from your cell phones paired devices.
- Power your cell phone off, then power it back on.
- Pair your Plantronics headset back to your cell phone (follow manual if unsure how)
- Your Plantronics headset should now be reset.
How do I pair my Plantronics with my iPhone?
To pair your Plantronics Bluetooth headset with your iPhone:
- On your iPhone, press Settings > General > Bluetooth.
- If Bluetooth is turned Off, tap to turn it On.
- Place your Bluetooth headset into pairing mode.
- When you see your Plantronics device name, tap it to pair and connect.
Can I use Plantronics headset with computer?
Being that the Plantronics CS540 isn’t Bluetooth and doesn’t connect with your computer, there’s a simple fix! You can purchase a USB wireless headset if you choose, or you can get the accessory below which will connect your cs540 to a computer.
How do I reset my Plantronics Bluetooth?
Can Plantronics c054 connect to computer?
A: The CS540 is traditionally used with your desk phone. However, if you would like to use it with your PC, you can purchase the Savi D100 USB Dongle or the APU-75 EHS cable.
How do I connect my PLT headset to my laptop?
Ultimate Plantronics Pairing Guide – YouTube
Why is my Plantronics headset microphone not working?
If your microphone is not working, check the following:
Wait for your computer to recognize the USB connection, and then test the microphone again. Make sure that your Plantronics headset is selected as the default audio device. Make sure the microphone is pointing towards the corner of your mouth.
How do I unpair my Plantronics Bluetooth?
Bluetooth Headsets: How to Reset the Connection
- Delete the headset from your cell phone’s list of paired devices.
- Once deleted, power your phone completely off, then power it back on. This resets the Bluetooth stack in the Bluetooth software on the phone.
- Re-pair the headset with your phone.
Why is Bluetooth not connecting?
For Android phones, go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile & Bluetooth. For iOS and iPadOS device, you’ll have to unpair all of your devices (go to Setting > Bluetooth, select the info icon and choose Forget This Device for each device) then restart your phone or tablet.
How do I factory reset my Plantronics?
Hold down the MINUS (-) volume control and the black power button at the same time until the blue light goes out. Step 3 Wait 1 minute for the reset to power down the software and clear firmware.
Why is my Plantronics headset not connecting to iPhone?
Make sure that your Bluetooth accessory and iOS or iPadOS device are close to each other. Turn your Bluetooth accessory off and back on again. Make sure that your Bluetooth accessory is on and fully charged or connected to power. If your accessory uses batteries, see if they need to be replaced.
How do I connect my Plantronics headset to my laptop Windows 10?
Turn the Universal Adapter on. Press and hold the adapter pairing/connect button for 7-10 seconds. When adapter starts flashing red and blue release the buttons. The headset and adapter will flash blue when paired successfully.
Why is my Bluetooth not connecting?
How do I connect my Plantronics Bluetooth to my computer?
How do I reset my Plantronics c054 headset?
Why is my mic not being detected?
The easiest way to fix this problem is to plug in a USB headset with microphone, or a USB webcam with a microphone. However, if you do see your microphone listed, click on it and make sure it is enabled. If you see the “enable” button appear for your microphone, this means the mic is disabled.
How do I reset my Plantronics headset?