What does a Power Commander do for a Yamaha r6?
The Power Commander V is a unique EFI tuning device because it can monitor and maintain your air/fuel ratio without directly changing the ECU. To reinstate your stock settings, all you need to do is uninstall the device, and you’re done.
What does a Power Commander 5 do?
What is a Power Commander? The Power Commander is a fuel injection and, on some models, an ignition timing adjustment unit that plugs ‘inline’ with the bike’s stock ECU (Electronic Control Unit). Changes are made to the bike’s fuel and ignition curves via the Power Commander’s onboard microprocessor.
What does a Power Commander do for your bike?
The Power Commander 6 fuel injection tuning device allows you to optimize your fuel and timing curve (where applicable) giving you the confidence to roam freely.
Does a Power Commander increase horsepower on a motorcycle?
The Power Commander is a tuning tool to adjust fuel, and on some models ignition timing. Just adding a Power Commander to a completely stock vehicle usually does not increase peak horsepower. It usually will improve drivability, throttle response, and mid-range horsepower and torque.
How do you adjust a power commander?
To adjust the buttons on your Power Commander III, follow the instructions below: With the ignition off, hold down all three buttons on the Power Commander III unit. While still holding down the buttons, turn on the ignition and start the bike. Release the buttons.
Do I need a Power Commander with a full exhaust?
Your bike will run with or without the pc and be just fine. It wont perform at its best but will still work.
What does flashing a motorcycle ECU do?
Tuning your ECU is also known as “flashing,” and the process of this flashing is a procedure where the software is updated to run your motorcycle more smoothly and more in precision with your riding style. Essentially, flashing or tuning your engine control unit is a remapping of the settings within the software.
Are power commanders safe?
Power Commanders do not harm your bike. They don’t “trick” the OEM ECU. It is nothing more than a piggyback ECU.
Do I need a power commander with a full exhaust?
How do you know if your power commander is working?
The easiest way to determine if the AutoTune is working is to go for a ride, come back, plug the Power Commander into a computer and look at the trim table(s). If there are values in any cell other than zero, AutoTune is working. If the table is all zeros, AutoTune is NOT working.
Why is my power commander not working?
If your Power Commander III is not communicating to the Control Center Software, the first thing to do is to make sure the USB connector is fully seated into the power commander. If there is any silver showing on the USB connector that plugs into the Power Commander, it is not completely plugged in.
Do I need a tune after new exhaust?
You need a tune – mainly to increase the amount of fuel injected into the combustion chamber. Otherwise, it will be a bottleneck to your HP gain – you only have extra air from the exhaust but not enough fuel to burn all of the air.
Is a power commander necessary?
If you have a full system you should definitely get a power commander, otherwise you’ll see performance losses. Even with a power commander some people have still had some gripes with their full system. It mostly just depends what you want out of your bike.
Is flashing an ECU worth it?
However, legalities out of the way, flashing an ECU is generally a cheap and effective option to pick up easy power and generally improve a motorcycle’s overall performance. As mentioned before, this is especially true if you have other power-adding modifications done.
Is a power commander a tuner?
With 10 throttle positions (more if desired) and 250RPM resolution, the Power Commander 6 is one of the most versatile tuners on the market.
How do you set up a Power Commander?
How to… fit a power commander
- Position the commander. Find somewhere protected from rain and engine heat to mount the power commander.
- Connect to the battery. The power commander has one black 12v connector, which goes onto the black negative battery terminal.
- Connect to the injectors.
- Check and start the bike.
How do I reset my power commander?
To reset the throttle position click on “Power Commander Tools” and then select “Set Throttle Position. To reset both the closed and open throttle positions, first make sure that the bike is communicating to the computer, then click on “Reset”. Twist the throttle wide open and release. Now click OK.
How much HP does a header add?
So how much hp do long tube headers add? If attached to a stock engine, you can expect about 6-9 hp over a manifold.
Does bigger exhaust consume more fuel?
In short – no. Louder exhaust does not use more fuel. In fact- there’s no correlation between them. A car engine creates combustion to deliver power – which generates a lot of noise.
Does changing exhaust affect engine?
Yes, changing the exhaust can affect the power of the engine.
Which is better power commander or ECU flash?
An ECU flash is undeniably more advanced and streamlined, and generally speaking it costs about $250 to $300 to have a shop perform a flash, which is actually cheaper than buying a Power Commander. The variety and extent of control offered by an ECU flash is staggering. This is just the tip of the iceberg.
Does ECU flash increase horsepower?
An ECU flash tune gives you more horsepower and torque by adjusting the spark timings in your engine’s cylinders. Basically, it optimizes for higher octane fuel so your engine gets a boost in power. That power comes out as more horsepower and torque.
Does Power Commander 5 have auto tune?
Once installed, the AutoTune kit monitors the air/fuel ratio. It then sends this information to the Power Commander V and automatically corrects it as you ride, letting you feel the changes as they happen.
How much does it cost to install Power Commander?
The most common type of motorcycle tuning is to purchase and install a Power Commander at about $350. It’s a convenient device that overrides your motorcycle’s computer configuration. Power Commander is the most popular choice among enthusiasts who need tuning after installing aftermarket mods like an exhaust system.
Will a Power Commander lose its map?
No, all Power Commanders utilize a nonvolatile memory (it does not require constant power to maintain it). The only way a map can be “erased” is to use a computer to load a new one in place of it. Was this article helpful?